Restore Your Car’s Old Look: How to Remove Deep Scratches from Car?

How to Remove Deep Scratches from Car

If you are looking for the best way on how to remove deep scratches from the car, you came to the right place. In the rest of this post, we will provide you with insights on the materials that will be needed, and more importantly, how the job can be completed successfully. Forget about having an expensive trip to the nearest auto detailing shop. You can do it even on your own!

Deep scratches, like other imperfections, are inevitable. Whether they are because of your fault or others are to be blamed, you do not need to ignore them. If not given immediate attention, they can grow bigger and can begin to rust. To add, it is obviously not a good sight. This can negatively affect the aesthetics of your car. To prevent problems from escalating, be sure to have the deep scratches resolved as soon as possible. Luckily, you do not have to spend a lot to make this possible. In the same way, you do not need to exert too much effort!

What You Will Need To Follow This Tutorial?

Here are some of the materials that will be required to follow the instructions that will be mentioned later:

  • Rust remover
  • Masking tape
  • Plastic cover
  • Assorted sandpaper
  • Prep solventĀ· Clean cloth
  • PrimerĀ· Touch-up paint
  • Clear coat
  • Car scratch remover

How to Remove Deep Scratches from Car?

Removing the scratches does not need to be a complicated task. You have to know how to do it right, and in the end, you will be able to do it right:

1. Prepare the Area

Make sure that the surface is thoroughly cleaned. It will be good to have it washed first so that the dirt can be removed before you get started. Also, pay attention to the presence of rust. If it is already present, use a commercially available rust remover. Wax, grease, and oil should also be thoroughly removed before you start working. Once it is clean, you can start with the next step.

2. Apply Masking Tape

This is one of the most important things that should be done, which will make sure that you will work only on the specific area where there is visible damage. Over-priming and over-spraying can happen, which is why it is important to cover the other areas. Use plastic to cover these areas and apply masking tape on the side. Avoid using duct tape as this can leave visible residues.

3. Sand the Surface

Using a 600-grit sandpaper, sand the damaged area in circular motion. Make sure to do this lightly so as not to cause any problem. You have the option to do dry or wet sanding, with the latter being the more popular option because it is quicker. Soak the sandpaper in water for about ten minutes and sand off the surface. Rinse it and sand several times until you can see that you have already reached the bottom of the scratch.

4. Repair the Scratch

This is the most important step in this tutorial on how to remove deep scratches from the car, making it important to pay attention to how this is properly done. Start by spraying prep solvent and wipe it with a clean cloth. Let it dry and after a while, spray the primer. The latter will be beneficial regarding preventing rusting. Make sure to choose a primer color that will perfectly complement your car. Once the primer has been applied, sand the surface. Before sanding, make sure that it is completely dry. If you want to avoid the appearance of fingerprints, you can wrap the sandpaper in a sponge.

After sanding, the next step is the application of paint. Apply the touch-up paint of your choice, making sure that the color will match your car. Shake the can before spraying. Be careful and see to it that little pressure is used so as not to overdo it. Apply at least three coats of the paint. In each coat, leave an interval of at least ten minutes or at least when the surface has already dried.

Once the paint is applied, proceed to apply the clear coat. This is meant to provide protection from external damages that can be caused by the heat of the sun and scratches, among others. It usually comes in a can with a plastic trigger for ease of application. Like with the paint, use at least three coatings.

Next, apply the rubbing compound, which will add a clear coating and gloss on the surface. This will help to fully restore the shiny coat of the car. It is abrasive, so make sure that this is done with thorough care. If it is overdone, it can result into chipping.

Pro Tips

As you work to remove the deep scratches in your car, here are some of the things that you have to keep in mind:

  • To know the right paint to use, look for the label that is usually located on the side of the door. Never use paint that is not the same color or at least close to the color of the original.
  • If there are light scratches, using toothpaste will do wonders. Just dab a small amount on the scratch and rub it with the use of a clean rag.
  • When applying touch-up paint, use the right brush. An artist brush or a toothpick would be best. They will make sure that you cover only the specific portion that needs to be fixed.


Now that you have reached the end of the article, we hope that you have learned a thing or two from the discussions above. Knowing how to remove deep scratches from the car can be a life-saver, especially from a financial perspective. There is no need to spend a fortune in auto detailing when you can do it on your own.

Is there are a tip that you would like to add? Have you tried any technique that proved to be effective? Feel free to share it in the comment section below.

Click Here to Leave a Comment Below