How To Clean Seat Belts: It is Not as Complicated as You Think?

How to clean seat belts

Safety is one of the most important concerns amongst many car owners. With this, it is important to make sure that the car is in its tip-top shape, including accessories that should be functioning at their best all the time. In this case, one of the most important is a seat belt. To make sure that the latter will keep you safe, it should be well-maintained. If you do not know how to do it, read the rest of this post and we’ll let you know how to clean seat belts.

Dirt, oil, and stain, among others, will contribute to the wear and tear of seat belts overtime. The carpet, seat, hood, and windshield, among other parts, are regularly cleaned. For many, the seat belts are often ignored. This should not be the case! They may seem small, but if they are not given proper attention and care, they will easily wear out and will be unable to perform its safety function as anticipated. Keep on reading and learn from our suggestions. There are different ways by which this can be done, depending on the materials that you have, as well as the time and the effort that you can spare.

What You Will Need to Follow This Tutorial?

In the succeeding parts of this post, we will give you different ways on how to clean seat belts and here are some of the materials that you will need:

  • Bowl
  • Warm water
  • Liquid dish soap
  • White distilled vinegar
  • Clean cloth
  • Clamp
  • Pressure washer

Here’s How to Clean Seat Belts?

There are different ways by which this can be done. Here is one of the simple ways by which this task can be accomplished:

  • In a bowl, combine two cups of warm water, one tablespoon of dish soap, and ¼ cup of distilled vinegar. The dish soap is the one responsible for getting rid of dirt that might have accumulated on the surface. On the other hand, the vinegar will do a good job in getting rid of the unwanted odor. It is also antibacterial, making it possible to get rid of harmful bacteria.
  • Now that the mixture is ready, you can start with the spot cleaning. Use a clean cloth, dip it in the mixture, and dab it on the surface where there are stains.
  • Pull the seat belt and have it clamped. By now, you can start cleaning all portions and make sure that no part is missed. It is important to clamp it properly so that it will not retract as you clean.
  • Make sure that the seat belt is dried before releasing the clamp. It will also be good to keep the windows open to allow enough air circulation to speed up drying. This will also allow you to get rid of the smell of vinegar.

The steps mentioned above are only for basic cleaning tasks. If there is extreme dirt and if it has been a long time since you last cleaned the seat belts, you need to exert more effort. With this, here are the steps that you should follow for more advanced cleaning:

  • Open the door and pull the seat belts outside so that you can cover all areas as you clean. Once it is extended, close the door and this will prevent the seat belt from retracting.
  • Now that it is fully extended, start the application of your choice of mild soap. Scrub it with the use of a brush, focusing in areas where there are tough stains.
  • The next thing that you will need is a pressure washer. Hold the belt and start spraying the pressure washer. See to it that it is set at its lowest setting. Start from the front and wash the back once you are done.
  • Rub it with a towel, which will help in the absorption of moisture. For the portion of the seatbelt that is inside the car, you can follow the instructions that have been mentioned above.

In some instances, the seat belt can be easily removed. This is a good thing since you can clean it properly outside of the car can have it dried under the heat of the sun. Just make sure that you know how to remove it properly, and more importantly, how it can be reassembled back to its original position. See to it that all screws and attachments are kept in a safe place as cleaning is done.

Pro Tips

Aside from the things that have been mentioned above, here are other things that you have to keep in mind:

  • Regular cleaning is required, which will prevent dirt from hardening. The longer it is left untouched, the more difficult it will be to remove.
  • Avoid cleaners with bleach and ammonia. These chemicals can lead to the quicker deterioration of the fabrics, and hence, this can compromise safety.
  • Using power washer should be done with caution. When used in the high setting, this can hurt you and this can also damage other parts of the car.
  • It will also be good if you can cover the seats with plastic. This will make sure that it won’t get wet, especially if it is made from leather.

Conclusion

By now, we hope that you have learned a thing or two from the discussions above. Learning how to clean seat belts is a must if you have a car. Similar to the other parts of the car, make sure that you pay attention to the maintenance of the seat belt. This is important not only for aesthetics, but for your safety as well.

Click Here to Leave a Comment Below